A machine or controller

No problem — building things is the R&D side of the shop. Book a time.

We design and build electronics: schematic, board, firmware, enclosure, and the software to drive it. Made in Winnellie.

When a stock PLC has the wrong I/O, the wrong form factor or no local support: relay panels, multi-channel I/O boards, motor and actuator drives, data loggers and PLC-style controllers built for the job. Old machines with dead controls get new relays, sensors, a controller and web management fitted to the machine you already own.

Ladder or structured text, the SCADA screens and the HMI, written so your own people can read it after we leave — and handed over with the source, not locked to us.

How it runs: a free first conversation to work out what it has to do and where it has to live, then a prototype you can try in the real environment, then tested units with the design files and source code — yours to keep.

You do not need drawings or a spec to start. Most of this begins as somebody describing a problem across the counter. Bring the problem.

Tell us where you're at — a sketch, a working prototype, a product that needs its next version — and where you want it to end up. How much of the build you want to do yourself sets the rest.

The design files, the board files and the source code end up yours. We will sign an NDA before you tell us anything, and the handover pack says how to run it without us.

And if it is not something we would do well, we will say so on the first call and point you at who does. Nothing is lost by asking.

Tell us what you have in mind and we'll scope it. Book a time. More about industrial automation.

We’re the end unit of the 143 Coonawarra Rd complex, on the Mataram St corner — the same block as Top End Car Rentals and Campervan Hire.

Come around to the Mataram St side and park on the hardstand out the front.

Campers and caravans: under 12 m only, and by booking — book a time and wait for the confirmation before you drive over, so the bay is clear when you arrive.

Searching the street address in Google drops you at the wrong building on Coonawarra Rd. Use the map link below — it is pinned on our door.